By CAS

EN ISO 3834 — Quality Requirements for Fusion Welding

Certification of a manufacturer's fusion welding quality arrangements against EN ISO 3834-2 (comprehensive), EN ISO 3834-3 (standard) or EN ISO 3834-4 (elementary quality requirements), at the level set by the product standard, specification or contract, or chosen with the criteria of EN ISO 3834-1:2021. EN ISO 3834 is not a management-system standard, so the certificate is a Certificate of Conformity. Issued By CAS under its own authority, outside the EGAC accredited scope, with no EGAC or IAF mark.

Standard

EN ISO 3834-2, -3, -4:2021

Service type

By CAS

Issued under

CAS — own authority

What it is

EN ISO 3834 sets out quality requirements for fusion welding of metallic materials, in the workshop and on site. Part 1 gives the criteria for selecting the appropriate level of quality requirements; parts 2, 3 and 4 give the requirements at three levels — comprehensive, standard and elementary; part 5 lists the documents a manufacturer has to conform to in order to claim conformity with part 2, 3 or 4. The requirements cover how a manufacturer controls its welding: review of requirements and technical review, subcontracting, welders and welding operators, welding coordination, inspection and testing personnel, production and test equipment, welding procedures and their qualification, welding consumables, storage of parent materials, post-weld heat treatment, inspection and testing before, during and after welding, non-conformance and corrective actions, calibration and validation of measuring, inspection and test equipment, identification and traceability, and quality records. Part 2 sets out all of these and part 3 the same elements in less detail; part 4 has no specific requirements on welding coordination, welding procedure specifications and their qualification, storage of parent materials, post-weld heat treatment, calibration, or identification and traceability — it asks that welding follows an appropriate welding technique. EN ISO 3834 is not a management-system standard and does not require one; a manufacturer that applies ISO 9001 can use it within its quality management system.

Who needs it

Manufacturers that weld metallic structures, equipment or components — steel and aluminium structures, pressure equipment, tanks, machinery — in the workshop or on site, and that need to show customers, specifiers or inspectors that their welding is under control. Product standards and contracts often call for a given level: for steel structures, for example, EN 1090-2 calls for EN ISO 3834-4 in execution class EXC1, EN ISO 3834-3 in EXC2 and EN ISO 3834-2 in EXC3 and EXC4.

Standards we certify against

EN ISO 3834-2:2021

Comprehensive quality requirements.

EN ISO 3834-3:2021

Standard quality requirements.

EN ISO 3834-4:2021

Elementary quality requirements.

Audit process

The applicant states the level it seeks (EN ISO 3834-2, -3 or -4) and the scope: the welding processes, the parent materials and the products, in the workshop and on site. CAS audits the manufacturer's welding arrangements against the requirements of that level — including the qualification of its welders and welding operators, its welding coordination and its welding procedure specifications and qualifications (both required by parts 2 and 3), and its inspection and testing — and sees welding work in progress. Certification follows an initial audit, annual surveillance audits and recertification every three years. The certificate is a Certificate of Conformity issued By CAS, outside CAS's EGAC accreditation; it names the level and can be verified on CAS CertSearch. CAS also issues qualification certificates for welders (EN ISO 9606) and for welding operators (EN ISO 14732).

Frequently asked questions

Common questions

Is EN ISO 3834 certification by CAS accredited?

No. CAS issues EN ISO 3834 certificates By CAS, under its own authority and outside its EGAC accreditation, which covers ISO 9001, 14001, 45001, 22000, 50001 and 22301 only. The certificate carries the CAS mark, not the EGAC or IAF marks, and can be verified on CAS CertSearch. Where a contract, product standard or regulation requires the certificate to be issued by an accredited body or a notified body, a By CAS certificate does not meet that requirement.

Which part is certified: EN ISO 3834-1, -2, -3 or -4?

Part 2, 3 or 4. EN ISO 3834-1 is the guide for choosing the level, and part 5 lists the documents a manufacturer has to conform to in order to claim conformity with part 2, 3 or 4; neither is certified on its own. The certificate states one level — comprehensive (-2), standard (-3) or elementary (-4) — for the welding processes and products in its scope. Under EN ISO 3834-1, a manufacturer that meets a higher level is considered to meet the lower levels too.

Does EN ISO 3834 certification cover CE marking of steel structures?

No. CE marking of structural steel and aluminium components under EN 1090-1 needs factory production control certification by a notified body under the Construction Products Regulation. EN 1090-2 calls for an EN ISO 3834 level according to the execution class, but neither EN 1090 nor the Regulation requires a separate EN ISO 3834 certificate, and a certificate By CAS is not a notified-body certificate and does not support CE marking.

How does it relate to ISO 9001 and to welder qualification?

ISO 9001 is a management-system standard; EN ISO 3834 is not, and it covers the welding-specific requirements a quality management system may leave open. The welders and welding operators a manufacturer uses must be qualified — for example to EN ISO 9606-1 or EN ISO 14732. CAS issues those qualification certificates too, and the welder tests and the EN ISO 3834 audit can be planned together.

Ready to certify against EN ISO 3834-2, -3, -4:2021?

Tell us about your organisation and scope — we’ll come back with a costed proposal, usually within two business days. No obligation.

Apply / Request certification →Talk to our team