Insights

ISO 45001 §5.4: worker consultation and participation, item by item

Clause 5.4 of ISO 45001:2018 requires a process for two things, not one: consultation of workers and participation of workers.

Published by CAS — Conformity Assessment Services · 20 November 2026 · 5 min read
ShareLinkedInFacebook
ISO 45001 §5.4: worker consultation and participation, item by item

Key takeaways

  1. 15.1 l): top management ensures that the organization establishes and implements the process.
  2. 25.2 f): the OH&S policy includes a commitment to consultation and participation of workers, and of workers' representatives where they exist.
  3. 36.2.1 c) 3): OH&S objectives take into account the results of consultation with workers. Annex A.3 b) explains that what is taken into account "cannot be excluded".
  4. 49.3 d) 5): management review considers trends in the consultation and participation of workers.

Clause 5.4 of ISO 45001:2018 requires a process for two things, not one: consultation of workers and participation of workers. Clause 3 defines them differently, and clause 5.4 lists different matters for each.

The clause numbers here are those of ISO 45001:2018. Amendment 1:2024 changed clauses 4.1 and 4.2 only.

Two words, two definitions

Clause 3.5 defines consultation as "seeking views before making a decision". Clause 3.4 defines participation as "involvement in decision-making". Each note says it includes engaging health and safety committees and workers' representatives, where they exist.

The difference is where the decision sits. In consultation, the organization decides after seeking workers' views. In participation, workers are involved in making the decision.

Annex A.5.4, which is informative, describes consultation as "two-way communication", with information given in time for workers to give informed feedback before the decision. Participation, it says, lets workers contribute to decisions on OH&S performance measures and proposed changes.

Who counts as a worker

Clause 3.3 defines a worker as a person performing work or work-related activities under the control of the organization. Its notes widen the term: paid or unpaid, temporary, seasonal or part-time; top management, managerial and non-managerial persons; and, according to context, workers of external providers, contractors, agency workers and other persons to the extent the organization shares control over their work.

ISO 45001 does not define a workers' representative. Under clause 3.9 Note 3, the rules that determine who they are, set by laws, regulations, collective agreements and practices, are legal requirements and other requirements.

What the clause requires

The opening paragraph requires the organization to establish, implement and maintain a process, or processes, for consultation and participation of workers at all applicable levels and functions, and of workers' representatives where they exist. It applies to the development, planning, implementation, performance evaluation and actions for improvement of the system.

Annex A.3 c) explains "applicable" as relevant or possible to apply, implying "if it can be done, it shall be done".

a) Mechanisms, time, training and resources for consultation and participation. Note 1 says worker representation can be a mechanism.

b) Timely access to information about the OH&S management system that is clear, understandable and relevant.

c) Obstacles or barriers to participation: determine them, remove them, and minimize those that cannot be removed.

d) Consultation of non-managerial workers, emphasized, on nine matters: the needs and expectations of interested parties (4.2); the OH&S policy (5.2); roles, responsibilities and authorities, as applicable (5.3); how legal requirements and other requirements will be fulfilled (6.1.3); OH&S objectives and the planning to achieve them (6.2); controls for outsourcing, procurement and contractors (8.1.4); what is monitored, measured and evaluated (9.1); the audit programme (9.2.2); and continual improvement (10.3).

e) Participation of non-managerial workers, emphasized, in seven matters: the mechanisms for their own consultation and participation; hazard identification and the assessment of risks and opportunities (6.1.1, 6.1.2); actions to eliminate hazards and reduce OH&S risks (6.1.4); competence requirements, training needs, training and its evaluation (7.2); what is communicated and how (7.4); control measures and their effective implementation and use (8.1, 8.1.3, 8.2); and the investigation of incidents and nonconformities, with the corrective actions that follow (10.2).

Clause 5.4 contains no requirement of its own for documented information.

The non-managerial emphasis

Note 3 gives the intent: the emphasis applies to the persons carrying out the work activities, and is not meant to exclude, for example, managers affected by work activities or other factors.

Read the two lists against the two definitions. On the matters in d), non-managerial workers' views are sought before the organization decides. In the matters in e), they are involved in the decision. Hazard identification, controls and incident investigation are on the second list.

Item e) 1) includes the mechanisms themselves. Clause 5.1 m) refers to it directly: top management supports the establishment and functioning of health and safety committees, with a reference to 5.4 e) 1).

Obstacles and barriers

Item c) is the one item in 5.4 that asks the organization to find something and take it away. Note 2 gives examples: failure to respond to worker inputs or suggestions, language or literacy barriers, reprisals or threats of reprisals, and policies or practices that discourage or penalize participation. Under that note, failing to respond to a suggestion can itself be an obstacle.

Note 4 adds that training at no cost to workers, and during working hours where possible, can remove significant barriers. Reprisals also appear in clause 5.1 k): protecting workers from reprisals when they report incidents, hazards, risks and opportunities is part of top management's leadership and commitment.

Where 5.4 comes back

Other clauses return to the subject. Three of them, 5.1 l), 6.2.1 c) 3) and 10.2 b), cite 5.4 by number:

  • 5.1 l): top management ensures that the organization establishes and implements the process.
  • 5.2 f): the OH&S policy includes a commitment to consultation and participation of workers, and of workers' representatives where they exist.
  • 6.2.1 c) 3): OH&S objectives take into account the results of consultation with workers. Annex A.3 b) explains that what is taken into account "cannot be excluded".
  • 9.3 d) 5): management review considers trends in the consultation and participation of workers.
  • 10.2 b): the need for corrective action after an incident or nonconformity is evaluated with the participation of workers.
  • 10.3 c): continual improvement includes promoting the participation of workers in implementing improvement actions.

What this means for you

If you are responsible for the OH&S management system: 5.4 d) and e) are two lists under two definitions, and an audit reads them that way, matter by matter.

If you are a worker or a workers' representative: the clause names the decisions on which your views are to be sought, and the ones in which you are to be involved.

If you are a buyer: worker participation in ISO 45001 is a requirement with named content, and part of what an accredited certificate is audited against.

This is generic information about the requirement, not advice on any particular management system.

CAS — An EGAC accredited MS certification body No. 012418. Accredited scope: ISO 9001, ISO 14001, ISO 45001, ISO 22000, ISO 50001 and ISO 22301. Certificates accredited for ISO 9001, 14001, 45001, 22000 and 50001 fall within EGAC's IAF MLA scope; ISO 22301 is accredited by EGAC and sits outside that scope.

Verify any certificate: cas.com.eg/certsearch

Apply for certification →Verify a certificate

Read next